Start with the driver order, not the sim
The Rowsfire A111 connects to your simulator through Mobiflight, and the order in which you start your software matters. The product notes warn that some third-party drivers can occupy serial ports and prevent the device from connecting properly. Before you open MSFS, make sure no other driver is holding the port the panel needs.
A practical sequence: connect the panel via its rear Type-C port, confirm it appears in Windows, start Mobiflight, then launch MSFS. If the panel does not respond, close other sim tools that may claim serial ports and reconnect. The hardware also supports a future RowsfireApp driver, so you have flexibility later, but for now Mobiflight is the working path.
What the A111 gives you to work with
- Rowsfire A111 1/1 Scale A320/A330/A350 RMP-ACP Panel for MSFS 2020/2024 & X-Plane(Ships within 15-20 days): True 1:1 RMP-ACP recreation with a custom backlit panel and aluminum alloy shell. The full-scale layout means the button and knob positions match the Airbus RMP-ACP, so your muscle memory transfers directly to the sim.

Rowsfire A111 1/1 Scale A320/A330/A350 RMP-ACP Panel for MSFS 2020/2024 & X-Plane(Ships within 15-20 days) - Rowsfire A111 1/1 Scale A320/A330/A350 RMP-ACP Panel for MSFS 2020/2024 & X-Plane(Ships within 15-20 days): Connects via Mobiflight, with planned transition to RowsfireApp; hardware supports both drivers. You can set up now with Mobiflight and know the panel has a future software path without replacing hardware.
- Rowsfire A111 1/1 Scale A320/A330/A350 RMP-ACP Panel for MSFS 2020/2024 & X-Plane(Ships within 15-20 days): Initial support covers MSFS2020 and MSFS2024, with planned compatibility for X-Plane 12. MSFS flyers can use the panel today; X-Plane users should check for updates before ordering if that sim is your primary platform.
Configure the panel in Mobiflight
- Connect and verify: Plug the Type-C cable into the rear port and confirm the panel is recognized in Windows before opening Mobiflight.
- Start Mobiflight first: Launch Mobiflight and let it detect the board. If it does not appear, close other sim utilities and reconnect.
- Assign functions: Use Mobiflight to map the RMP-ACP buttons and knobs to the corresponding radio and audio functions in your aircraft. The hardware is programmable, so you can customize assignments to match your preferred setup.
- Launch MSFS and test: Start MSFS 2020 or 2024, load a flight, and test each control. Adjust assignments in Mobiflight as needed.
Key binding for Fenix and FBW
Early versions of the A111 support the Fenix and FBW A320. Future updates are planned to extend support to Inibuilds, Toliss and more aircraft. For now, focus your binding on the radio and audio panel functions those aircraft expose.
The exact key binding process depends on Mobiflight and your aircraft's available events. The supplied information does not list specific button-to-event mappings, so you will need to use Mobiflight's interface to assign the controls. The panel's programmability is the key advantage here: you can tailor each knob and button to the radio or audio function you use most.
Mounting and physical fit
The A111 uses an embedded rail-mount design, so no VESA interface is required. That makes it easier to integrate into a home cockpit without extra brackets. The aluminum alloy shell gives it a solid feel, and the custom backlit panel helps in dim sim rooms.
At 17 x 14.5 x 3.7cm and 1000g, it is compact but substantial. Check that your desk or rail system can support it before mounting. The package includes a Type-C cable, but the supplied information does not confirm whether mounting screws or rails are included, so verify before you build.
Compatibility notes before you buy
- Rowsfire A111 1/1 Scale A320/A330/A350 RMP-ACP Panel for MSFS 2020/2024 & X-Plane(Ships within 15-20 days): Age 16+. This is a hobbyist product, not a toy; keep it away from young children.
- Rowsfire A111 1/1 Scale A320/A330/A350 RMP-ACP Panel for MSFS 2020/2024 & X-Plane(Ships within 15-20 days): Product weight 1000g; package weight 1200g. The panel is heavy enough to stay put on a desk, but check your mounting solution can handle it.
What to check before your first flight
After binding, run a quick ground test: cycle through radio frequencies, adjust volumes, and press each button to confirm the sim responds. If a control does not work, revisit the Mobiflight assignment and ensure no other driver is interfering.
Remember that X-Plane 12 support is planned but not yet confirmed as available. If you fly X-Plane today, the A111 may not work until that update arrives. For MSFS 2020/2024 users, the panel is ready to integrate once you follow the driver order and bind your controls.


