Back to Blog
How-to Guides 2026-11-16 litnxt 0 views

A101 A320 Mini Overhead Panel: Setup for Fenix and FBW

A101 A320 Mini Overhead Panel: Setup for Fenix and FBW

Get the Rowsfire A101 v3.0 A320 mini overhead panel running in MSFS 2020/2024 with Fenix or FBW. Follow the v3.0 config rule, MobiFlight setup, and binding checkpoints.

The v3.0 rule that decides whether setup works

The Rowsfire A101 is a plug-and-play overhead panel for MSFS 2020 and MSFS 2024 on Windows, built around MobiFlight. Before you touch a single switch assignment, settle the version question: this is the v3.0 release, and its configuration file has been completely revised. Only the v3.0 configuration works. Do not load files from v1, v2, or any file without a v3.0 label, even if a forum post or an old download folder suggests otherwise.

That one rule prevents most of the confusing behavior people blame on the hardware. If switches do nothing, respond in the wrong sim, or fight with another add-on, verify the config version first.

What the A101 v3.0 panel gives you to work with

Setup order for MSFS 2020 or 2024

Work in this order so you always know which layer caused a problem. The panel ships with a USB data cable, so you can connect it as soon as you have the software ready.

  1. Confirm your sim and aircraft: The panel supports MSFS2020 and MSFS2024 on Windows, and the supplied compatibility list names FENIX, FBW, iniBuilds, and PMDG. The panel is also listed as suitable for other aircraft such as the A350, A380, B773, B738, and B777, but the listing asks you to confirm your specific aircraft model before ordering. For this guide, the target is the Fenix A320 or FBW A320 in MSFS.
  2. Install MobiFlight and the Rowsfire configuration: Download MobiFlight from mobiflight.com and the Rowsfire configuration from the supplied GitHub link (github.com/Rowsfire/Rowsfire-MobiFlightConnector). Use only the v3.0 configuration. The listing also provides an FSUIPC7 link at fsuipc.com, which is relevant if your setup depends on FSUIPC7.
  3. Connect the panel and check it is seen: Plug the included USB data cable into the PC. The listing describes plug-and-play behavior with MobiFlight, so the first checkpoint is whether MobiFlight recognizes the board and its switches before you load an aircraft.
  4. Load the Fenix or FBW A320 and test the dual-position switches: The panel includes dual-position toggle switches for key functions such as Terrain Radar, Windshear, Seatbelt Sign, and No Smoking indicator. Test those first because they are explicitly named in the supplied product details. If they respond, the core config is working.
  5. Check the backlight behavior separately: The v3.0 light-sync feature links lighting with the simulator for dynamic effects, including smooth brightness adjustment and full on/off control. Verify this after switch function is confirmed, so you can tell a lighting issue from a binding issue.

Fenix and FBW: what the panel supports and what to verify

The listing names FENIX, FBW, iniBuilds, and PMDG as supported add-ons, so both the Fenix A320 and the FBW A320 are within the stated compatibility. The practical binding work happens in MobiFlight using the v3.0 configuration, not in the sim's own control assignments. If you are coming from a keyboard-and-mouse overhead, resist the urge to duplicate assignments in MSFS; keep the panel's functions on the MobiFlight side so the two layers do not conflict.

The panel's dual-position switches map to specific overhead functions named in the listing. For Fenix A320 overhead panel binding, start with those named functions and confirm each one changes state in the aircraft. For FBW A320 overhead panel, do the same check. The supplied information does not list every individual switch on the panel, so treat any function not named in the listing as something to identify in MobiFlight rather than assume.

Mounting and desk checks before you fly

The A101 is designed to sit on a desk, and its physical details affect how you place it.

  • Use the 13-degree tilt and non-slip bottom: The panel has a convenient 13-degree tilt angle for better operation and a non-slip bottom that adheres to your desktop. Place it where that angle suits your reach before you start binding.
  • Plan for bracket mounting only if you need it: The metal housing has two small holes on the back for fixing to the bracket. The listing does not include a bracket, so treat this as a mounting option rather than a supplied part.
  • Keep the backlit interface and panel sticker in mind: The panel comes with a backlit interface and a custom high-definition panel sticker. Check that the sticker is seated correctly if any label looks off; the listing does not describe replacing it.

MSFS 2024 overhead panel config: what changes and what does not

For MSFS 2024 overhead panel config, the supplied compatibility statement covers MSFS2024 alongside MSFS2020, and the v3.0 configuration is the one to use. The version rule does not relax in 2024: files from v1, v2, or unlabeled files are not to be used. The listing also mentions FSUIPC7 as a separate download, which matters if your MobiFlight setup relies on it. Beyond that, the supplied evidence does not describe a separate 2024-specific procedure, so follow the same order: v3.0 config, MobiFlight, aircraft load, switch test, lighting test.

Where the A101 fits in a home cockpit

What the supplied information does not confirm

The listing does not provide a step-by-step binding table for every switch, a list of every overhead function on the panel, or a troubleshooting guide for MobiFlight detection issues. It also does not state a specific age range, which matters because the product sits in a toys and games category; if you are buying for a younger flight sim fan, treat the panel as a desktop peripheral and supervise its use. For anything not covered here, the supplied MobiFlight tutorial and the Rowsfire configuration repository are the first places to look.

Related Articles

Customer Service
Home
Products
Cart
Profile