Powrót do bloga
Poradniki 2026-11-20 litnxt 0 wyświetleń

Rowsfire D103 G1000NXI Panel: MSFS Setup Guide

Rowsfire D103 G1000NXI Panel: MSFS Setup Guide

Learn how to set up the Rowsfire D103 G1000NXI PFD and GMA audio panel for MSFS 2020/2024 and X-Plane 11/12. This guide covers connections, Mobiflight configuration, and key specifications.

What the D103 G1000NXI Panel Does in Your Cockpit

The Rowsfire D103 is a 1:1 scale replica of the G1000NXi Primary Flight Display (PFD) with an integrated GMA audio panel. It connects to your PC and works with Microsoft Flight Simulator 2020/2024 and X-Plane 11/12, giving you a dedicated hardware panel for flight training and simulation. This guide focuses on initial setup, driver configuration, and placement considerations so you can get the panel working with your sim of choice.

Rowsfire D103 Key Specifications

What You Need Before You Start

The D103 is a USB-connected device. Ensure your PC has a free USB port (USB 2.0 or 3.0). You will also need:

  • Mobiflight software: Download and install Mobiflight on your Windows PC. The supplied information confirms Mobiflight support and configuration tutorials are included.
  • Flight simulator: The panel is confirmed to work with MSFS 2020, MSFS 2024, X-Plane 11, and X-Plane 12. Make sure your sim is installed and updated.
  • USB cable: The panel connects via USB. Use the cable provided in the box (not detailed in the supplied information, but standard USB-A to USB-B or USB-C is typical for such panels).

Step-by-Step Setup Process

The following steps are based on the supplied compatibility evidence and typical Mobiflight workflow for flight sim panels. Actual tutorials may vary.

  1. 1. Connect the D103 panel to your PC: Plug the USB cable into the panel and an available USB port on your computer. Windows should detect the device as a USB HID device.
  2. 2. Install Mobiflight and drivers: Download Mobiflight from the official site and run the installer. Follow the supplied configuration tutorials to install the necessary drivers for the D103.
  3. 3. Open Mobiflight and configure the panel: Launch Mobiflight. The D103 should appear as a detected device. If not, check the USB connection and driver installation. Use the configuration tutorial to map the PFD and GMA audio panel controls to your sim’s commands.
  4. 4. Launch your flight simulator: Start MSFS 2020, MSFS 2024, X-Plane 11, or X-Plane 12. The panel’s PFD and audio controls should now be functional. Adjust the Mobiflight mapping if any controls do not respond.

Placement and Physical Fit

At 31 x 21 x 5 cm, the D103 is a substantial panel. It is designed as a 1:1 scale replica, so it will match the real G1000NXi dimensions. Place it on a stable desk or mount it using a VESA-compatible arm if your setup allows. The aluminum alloy and resin construction is sturdy but not shockproof; avoid dropping or placing heavy objects on top of it. The panel is recommended for ages 16 and up.

Compatibility Notes and What Is Not Confirmed

The supplied information confirms compatibility with MSFS 2020/2024 and X-Plane 11/12. It does not confirm support for other simulators like Prepar3D or DCS World. If you use those sims, you may need to test Mobiflight mapping yourself. The panel also works as a standalone projection screen for PFD and ND displays in aircraft like the 737 and A320, but this is not a primary feature for setup. No specific care or cleaning instructions are provided beyond general handling of electronic devices.

Powiązane artykuły

Customer Service
Strona główna
Produkty
Koszyk
Profil