Two accessories, two different jobs
The protective case and the storage bag solve different problems, and mixing them up is the most common source of disappointment. The case is a 3D-printed PLA shell tailored to the TRIMUI SMART PRO and TRIMUI SMART PRO S, so it stays on the console and shields it from scratches, dust and minor impacts. The storage bag is a nylon pouch listed for a wider set of handhelds, so it carries the console rather than covering it.
That distinction drives everything below: how you clean each one, how you pack, and which one to reach for on a given trip.
What the TRIMUI SMART PRO case is listed to do
- Protective Case for TRIMUI SMART PRO/TRIMUI SMART PRO S Handheld Gaming Console: Tailor-made for a snug and secure fit on the TRIMUI SMART PRO and TRIMUI SMART PRO S. Because it is shaped to the console, it protects during play and travel without a separate pouch.

Protective Case for TRIMUI SMART PRO/TRIMUI SMART PRO S Handheld Gaming Console - Protective Case for TRIMUI SMART PRO/TRIMUI SMART PRO S Handheld Gaming Console: Made from premium PLA and listed to shield against scratches, dust and minor impacts. PLA is a rigid 3D-printed material, so the care advice below focuses on keeping that shell clean and intact rather than flexible.
- Protective Case for TRIMUI SMART PRO/TRIMUI SMART PRO S Handheld Gaming Console: Weighs 132 g and measures 19.4 x 9.8 x 2.7 cm. These are the numbers to compare against your bag or pocket before you commit.
- Protective Case for TRIMUI SMART PRO/TRIMUI SMART PRO S Handheld Gaming Console: Available in Starry Black, Black and White; listed for ages 16+. Color is the only option to choose, and the age listing is worth noting if the console is shared with younger players.
Handheld case cleaning habits that suit a PLA shell
- Wipe, don't soak: The listing describes a rigid PLA shell, not a waterproof one. A soft, barely damp cloth is the safer routine for dust and fingerprints; avoid running water or leaving the case wet.
- Keep heat away: PLA is a 3D-printed material. Leaving the cased console on a hot dashboard or near a heater is the kind of habit worth avoiding, even though the listing does not give a temperature limit.
- Check the fit after cleaning: The case is sold as a snug fit. After wiping, reseat the console and confirm the shell sits flush before you pack it away.
- Store it on the console, not loose in a bag: A separate hard shell rattling around with cables and chargers is more likely to pick up scuffs than one doing its job on the handheld.
What the Litnxt storage bag is listed to fit
- Retro Game Console Storage Bag (Litnxt Customized Version): Nylon storage bag listed as suitable for Miyoo Mini Plus, TrimUI Brick, Anbernic RG35XX, Powkiddy RGB20S, Anbernic RG353V, Anbernic RG353VS, GKD PIXEL 2 and RG34XX. The TRIMUI SMART PRO and SMART PRO S are not named in that compatibility list, so check dimensions before assuming this bag is the right carrier for your console.

Retro Game Console Storage Bag (Litnxt Customized Version) - Retro Game Console Storage Bag (Litnxt Customized Version): Weighs 57 g; package dimensions are 15 x 8 x 2 cm. The pouch is compact and light, which tells you roughly how much room you have for a handheld and a cable.
The compatibility gap worth checking first
The storage bag listing names several consoles but not the TRIMUI SMART PRO or SMART PRO S. That is not a statement that it will not fit; it simply means the supplied information does not confirm it. Before ordering the bag as a TRIMUI carrier, compare the bag's 15 x 8 x 2 cm package footprint with your console and decide whether the margin is enough for you.
If confirmed fit matters more than a soft pouch, the tailored PLA case is the accessory the listing explicitly ties to both TRIMUI models. The bag remains a sensible option for the handhelds it names, or as a secondary pouch for cables and small extras.
Packing a retro console bag without regrets
- Start with the console in its case: The PLA case is the layer listed for scratches, dust and minor impacts, so it does the protecting while the bag does the carrying.
- Keep the bag light: At 57 g and 15 x 8 x 2 cm, the pouch is not built as a gear hauler. Pack the console and a charging cable, and leave bulky accessories at home.
- Separate metal and screen: Cables and adapters are the usual culprits for scuffs. If you carry them in the same pouch, keep them away from the console's screen side.
- Do a dry run before travel day: Pack once at home, close the bag, and check that nothing presses on the console. Adjust before you are standing at a departure gate.
Ordering timeline for the 3D-printed case
The TRIMUI SMART PRO case is a 3D-printed customized accessory, and the listing asks you to allow 7–10 days for delivery to be arranged. If you are buying it as a gift or before a trip, that window belongs in your planning. The storage bag has no comparable lead time stated in the supplied information.
Color is the only option on the case, so there is no size decision to make, only Starry Black, Black or White.
Care claims the listings do not confirm
- No cleaning instructions are supplied: Neither listing gives a washing method, detergent, temperature or drying instruction. The habits above are general good practice for a rigid PLA shell and a nylon pouch, not manufacturer steps.
- No drop rating or water resistance is stated: The case is listed for minor impacts, scratches and dust. Treat that as the stated level of protection rather than assuming more.
- No TRIMUI fit confirmation for the bag: The bag's compatibility list does not include either TRIMUI model, so a dimensions check is the honest way to decide.



