Install a Custom Handle on Your RG477M

Quick answer

Attach the custom handle by aligning it with the RG477M's back panel and snapping it into place. No tools or adhesives are needed.

Installation steps

1. 1. Power off and inspect: Turn off the RG477M and remove any case or grip already attached. Check that the back panel is clean and free of debris. A clean surface helps the handle grip securely and prevents scratches.
2. 2. Align the handle: Hold the custom handle with the curved side facing the console's back. Line up the mounting tabs on the handle with the corresponding slots on the RG477M's rear edge. If it doesn't align easily, rotate the handle 180° – the tabs are asymmetrical.
3. 3. Snap into place: Press the handle evenly onto the console until you hear a soft click. Start from one side and work your way across to ensure even pressure. Avoid forcing it. If resistance is high, double-check alignment rather than pushing harder.
4. 4. Test the fit: Hold the console normally and check that all buttons, triggers, and ports remain accessible. The handle should not block the headphone jack, USB-C port, or shoulder buttons. If a port is obstructed, remove the handle and re-seat it slightly lower or higher.
5. 5. Remove and store when not in use: To detach, gently pry one corner of the handle away from the console. The PLA plastic flexes slightly, so it won't break with careful handling. Store the handle in a dry place to avoid warping. Avoid leaving it in direct sunlight for long periods.

What you need

• Custom Handle for RG477M Retro Portable Handheld Game Console: Designed specifically for the RG477M console. Material: PLA. Weight: 62 g. Available in White or Black. The snug fit means no wobble during gameplay, and the PLA material is durable enough for daily use while remaining lightweight.