What This Screw Kit Does for Your Flight Sim Setup
Mounting flight sim panels securely to a VESA-compatible backplate or stand is essential for a stable cockpit. The Screw Kit Compatible with VESA-Mount on Flight Simulator Back provides the hardware you need: four metal screws, four nylon washers, and one hexagon socket wrench. This guide explains how to use each component for a reliable installation.
Kit Components and What They Do
- Screw Kit Compatible with VESA-Mount on Flight Simulator Back + Screw Washer Kit + Hexagon Socket Wrench(No delivery if purchased separately): Screw Kit Compatible with VESA-Mount on Flight Simulator Back (4PCS) – Material: Metal, Weight: 10g, Package Weight: 20g, Package Dimensions: 5 x 5 x 5cm, Packing: Bag, Age: 16+ The four metal screws are the primary fasteners that attach your panel to the VESA mount. Their metal construction provides strength for a rigid hold.

Screw Kit Compatible with VESA-Mount on Flight Simulator Back + Screw Washer Kit + Hexagon Socket Wrench(No delivery if purchased separately) - Screw Kit Compatible with VESA-Mount on Flight Simulator Back + Screw Washer Kit + Hexagon Socket Wrench(No delivery if purchased separately): Screw Washer Kit Compatible with VESA-Mount on Flight Simulator Back (4PCS) – Material: Nylon Nylon washers sit between the screw head and the panel or mount surface, preventing scratches and distributing clamping force evenly. They also help reduce vibration transfer.
- Screw Kit Compatible with VESA-Mount on Flight Simulator Back + Screw Washer Kit + Hexagon Socket Wrench(No delivery if purchased separately): Hexagon Socket Wrench Compatible with VESA-Mount on Flight Simulator Back (1 Piece) The hexagon socket wrench is the correct tool for tightening the metal screws without stripping their heads. Using the supplied wrench ensures proper torque.
Step-by-Step Installation
Follow these steps to mount your flight sim panel using the screw kit. The process assumes your panel and VESA bracket have matching threaded holes.
- 1. Align the panel with the VESA mount: Position the panel so its mounting holes line up with the holes on the VESA backplate or stand. Ensure the panel is oriented correctly for your cockpit layout.
- 2. Insert the nylon washers: Place one nylon washer over each screw hole on the panel or mount. The washer should sit between the screw head and the surface to prevent damage.
- 3. Insert and hand-tighten the metal screws: Insert a metal screw through each washer and into the threaded hole. Turn each screw by hand until it bites into the threads, keeping the panel aligned.
- 4. Tighten with the hexagon socket wrench: Use the supplied hexagon socket wrench to tighten each screw evenly. Avoid over-tightening; snug is sufficient. The wrench fits the screw heads precisely.
- 5. Check stability: Gently wiggle the panel to confirm it is firmly attached. If movement is felt, re-check screw tightness. The metal screws and nylon washers should hold the panel securely.
What the Kit Does Not Include (and Why That Matters)
The screw kit provides only the fasteners and wrench—it does not include the VESA mount, panel, or any adhesive. The supplied information does not confirm compatibility with specific panel models or VESA patterns. Before ordering, verify that your panel’s mounting holes match the screw size and thread pitch of the kit. The age rating of 16+ indicates the kit is intended for adult assembly.


